Building work for Folkestone homes, done properly. Free site visit & quote07763 100 477 · · hello@folkestonebuilder.co.uk
Folkestone / BuilderFolkestone · Sandgate · Hythe · Cheriton · CT19 · CT20 · CT21

← All guides · Guide

Building in a flood-risk area near Hythe

Parts of the low-lying coastal strip towards Hythe are at risk of flooding. If your property is one of them, it affects what you can build and how.

Find out where you stand

The Environment Agency publishes flood maps for England that show the flood zone a property sits in. Zone 1 is the lowest risk, zone 2 is medium and zone 3 is the highest. Check your address, and also ask your insurer and the council what they know about the area. Flood risk can come from the sea, from rivers and from surface water, which are different problems.

What it means for planning

A householder extension in a higher-risk zone can still be allowed, but the council may ask for a flood risk assessment or apply specific conditions. Even where permitted development is possible, rights can be restricted, so check the current rules with the council or a planning consultant rather than assuming. Do this before you spend money on drawings.

Floor levels

A common expectation in flood zones is that new floor levels should be no lower than the existing floor, and sometimes higher. That can interact with doorways, steps and access, so it needs thinking about at the design stage rather than finding out at the inspection.

Flood-resilient construction

Flood-resilient building means choosing materials and details that cope with water and dry out afterwards. Typical measures include solid concrete floors rather than timber, water-resistant plaster and insulation, sockets and the electrics raised higher on the wall, and kitchen units that can be replaced more easily. The aim is to limit the damage and the time to get home back to normal. Not every measure suits every house, so it is worth getting advice on what fits yours.

Drainage and what goes in the ground

Extensions mean more hard surface and more rainwater. In a low-lying area, where the water goes matters. Soakaways may not work if the water table is high, so connections and storage options need checking early. Ask who is checking the drainage design.

Insurance

Tell your insurer about the project and ask whether a flood-resilient design affects cover or premiums. Do this before the work, not after. Some insurers have specific questions about floor levels and materials.

Garden rooms and outbuildings

Smaller buildings are not exempt from the problem. A garden room on a flood-risk plot may need a raised base and electrics kept well up the wall. Consider what you will store in it and what would be lost in a flood.

Questions for your builder

Have you built in flood zones before? How is the floor level decided? Which materials would you choose and why? What has to be inspected, and by whom? Who is dealing with the council and the flood questions? A clear, specific answer is a good sign. A shrug is a bad one.

Questions for the council and the water company

Ask the planning department whether your address is in a flood zone and what they expect for an extension, and ask whether there is a local flood history. For drainage, the water company can tell you about public sewers and capacity. Write down what you are told and who said it, because these answers will shape the design.

Local knowledge also counts. Neighbours who have lived on the street for years may know which gardens flood and which do not, and that can be more precise than the map.

Living with the risk afterwards

Even a well-designed building can be affected by a bad flood. Know where your stopcock and electrical isolator are, think about where you would move valuables, and check whether you can sign up for flood warnings from the Environment Agency. Resilience is partly about the building and partly about being ready.

Extensions and the neighbours

Changes to a building on a flood plain can affect others if water is pushed elsewhere, which is one reason the council looks at them closely. Ask whether your design affects the flow of water, whether fences and walls will block it and how rainwater leaves the plot. A responsible design takes account of its neighbours as well as the occupants.

A sensible approach

Check the risk first, ask the council early, and design for the water rather than pretending it will not arrive. It adds some cost and thought at the start and can save a great deal afterwards.

Related pages

Free site visit and quote

Tell us about the project at hello@folkestonebuilder.co.uk or on WhatsApp. We'll arrange a site visit to give you a proper quote.

Got a Folkestone project in mind? Start with a look at the site.

Free, no-obligation site visit and quote. Describe the job, send a few photos of the house or the space, and we will arrange a time to see it properly.